Tuesday, October 25, 2011

Concrete Shower Progress... and more first.

The bathroom light/vent fan casts a warm glow on the tongue-and-groove ceiling.




I decided that I wanted to hard-wire in a vanity light, and so I got to experiment with cutting through the lime plaster/earthen plaster/ metal lath, and doing some retro-fit wiring. The top hole is for the light box, the middle hole is where I had to drill a hole through a wall stud to get the cable through, and the third hole is where the switch is to be installed. I was able to then fish the wires behind the plaster to get from one hole to the next, to avoid cutting away more of the finished wall.


I found it very easy to cut through the lime plaster neatly with a flathead screwdriver.




The light is now functional and ready to be mounted properly on the wall, but I'm waiting for the brown patch plaster to dry. Soon the bathroom walls will get the finish coat of plaster!


Here's Jeremy's vanity with the vessel sink installed.



Mike working on preparing the base cabinets for a future tile countertop. Here he goes the extra mile to knock a shim under the edge of the cabinet to level it.


Installing the metal lath:


And plastering over with the scratch coat of plaster:


The concrete shower has been quite a project. These photos are from the day after Mike and I labored for 8 hours straight, troweling yellow stucco around all of the sculptural details to complete the final layer of the shower walls:




You'll notice in the photo above that the bench and floor are not finished. This is because we wanted to do them in a different color (which turned out to be a deep purple). Here is the red and black pigments that I bought to add to the white Portland cement:



Dry-mixing the pigments and cement. The other ingredients that were then added were water and sand.


And here is the finished floor/bench stucco (and a beautiful stone that we mortared in): It's looking quite shiny and very purple in the photo because it is fresh. It will dry to be less shiny and more of a faded purple.



Now all the shower needs is a coat of sealant over the concrete (we're looking for the right product that is both non-toxic and functional), and of course a curtain!


Leo and Danielle making opposite-facing, similar expressions:


A little snuggler, he is.








2 comments:

  1. What a big boy!!

    I'm impressed by this earthen shower!! Let us know what kind of sealant you end up finding.

    And I think it's our turn to come to you guys? Luca misses his baby friend!

    ReplyDelete
  2. Hi there, hope you don't mind me contacting you. I am starting out on a shower and I really like what you did with this one. While I do have many questions that I could ask, my main one is regarding how you finished the floor? You said you used portland cement. Did you do the whole pan in one go or is it two layers? If two, how thick did the finish layer have to be? Finally, did you do anything special to have the finish of the concrete be so smooth (it has texture but the concrete looks smooth)? Really appreciate your help. You do super nice work. Inspiring stuff! Take care. Joel cre8karma at yahoo.com

    ReplyDelete